Menu

BWC

Cybersecurity Overlord ✭✭✭
Avatar

Join the Conversation

To sign in, use your existing MySonicWall account. To create a free MySonicWall account click "Register".

Sign In Register

BWC Cybersecurity Overlord ✭✭✭

Badges (25)

4 Year Anniversary3 Year Anniversary250 Likes100 Answers100 Helpfuls2 Year Anniversary1,000 Comments50 Answers1 Year Anniversary500 Comments25 Answers100 Likes25 Helpfuls100 CommentsWork Out Loud5 Answers25 LikesFirst Answer10 Comments5 HelpfulsFirst Comment5 LikesPhotogenicName DropperEarly Adopter
See More

Reactions

8 Promote 179 Helpful 387 Like 0 Spam 5 Abuse

Comments

  • @Luigi77 PBR is what you want, I described it over there and it's similar to your demand: In your case Default Route for LAN1 to WAN1 Gateway and Default Route for LAN2 to WAN2 Gateway. —Michael@BWC
    in Configure two WAN and two LAN on TZ-270 Comment by BWC 9:53AM
  • @sukarechhe I'am seeing this as well on some deployments. In my case it's related to SSO (authentication) to the Firewall. Is this happening for regular WAN traffic in your case? —Michael@BWC
    in We have upgraded firmware version from Version 7.0.1-5145 to 7.0.1-5161 and getting issue Comment by BWC 8:52AM
  • @TraNhu your firmware is way to old and probably due to SSL/TLS issues your appliance is not able to connect to the licensing servers anymore because of the more modern encryption protocols are in use. Update to 6.5.4.15 and give it a try, other benefit would be that you close all the vulnerabilities since 6.5.1.2, a lot…
    in Failed to synchronize license information with Licensing Server. 1001 Comment by BWC November 13
  • @johnswenson1 my best guess would be, that either the Subnet mask or the Default Gateway of the statically configured clients does not matach your configuration. Make sure they are correct. —Michael@BWC
    in TZ470 allow traffic between zones Comment by BWC November 12
  • @TechGuardian I had some weird issues myself on my Mac recently and it was caused by an SentinelOne Update. It ended up in having multiple "Filter & Proxys" installed in my Network settings. In my case "SentinelOne Network Monitoring" was registered twice which caused random drops of Network Connectivity. It's just a wild…
    in Got nl down for ppp unit Comment by BWC November 12
  • @lgfamisan go into the settings of your "Defaulf LB Group" and check the tab Probing. If "Probe responder.global.sonicwall.com on all interfaces in this group" is enabled you cannot check per Interface and the option is greyed out. Just disable that option and do your probing per Interface like you always did. —Michael@BWC
    in Unable to config physical and logical on Interface probing on TZ570 Comment by BWC November 12
  • Long story short, the issue was that my CSE org was scheduled for deletion on Oct 2nd because my trial keys expired earlier on. On Oct 1st I activated my retail keys for 1 year, but due to a bug the CSE got deleted anyways. After a long journey with the very helpful Technical Support Team we figured this out, SNWL fixed…
    in Connecting to CSE Control Center - stuck Comment by BWC November 7
  • @Simon_Weel if you google for Capture Client Admin Guide this is the first thing that comes up: Capture Client is using SentinelOne as underlying product and just add some bells and whistles to it. Sometimes it lacks behind the SentinelOne Release schedule, which can cause trouble like related to OS updates etc. Some…
    in How about Capture Client? Comment by BWC November 5
  • @Siuren the NSa 2700 has to be registered with MySonicWall, then you should just follow the steps I mentioned above. -5145 is the way to go for using the Migration Tool, then update to -5161 after migrating the settings. If your appliance is registered and download is still not possible contact Customer Support. I checked…
    in About replace "NSA2600 single ( OS 6.5.4)" to "NSA2700 HA (OS 7.0)" Comment by BWC November 1
  • @johnswenson1 this sounds right to me, if all of your endpoints have a valid default route back to the TZ470. You might check with the Packet Monitor, just filter for your Source and Destination Address and have a look for dropped packets. —Michael@BWC
    in TZ470 allow traffic between zones Comment by BWC November 1
  • This might be what you're looking for. —Michael@BWC
    in What Order are Security Services Processed in TZ Firewalls Comment by BWC October 31
  • @bzperry I'am located in Germany, the distributor pricelist shows price band 1-24, I googled the SKUs and 5-24 showed up. I believe 5-24 is outdated, because if I check the catalog on MySonicWall it shows 1-24 as well. A question probably only SNWL can answer for your geographic location. —Michael@BWC
    in How do endpoint licenses work? Comment by BWC October 31
  • @bzperry an Endpoint is a Computer (Windows, macOS, Linux) which needs to be licensed for using Capture Client. You don't license CC to the Firewall. The license can be attached to a Firewall to enforce CC when behind a SNWL Firewall, but this is not mandatory. There are a couple of SKUs available, I mentioned the price…
    in How do endpoint licenses work? Comment by BWC October 31
  • @bzperry you can see Capture Client as an independent product from the Firewall. Capture ATP (auto mitigation) is done on the Endpoint not on the Firewall if enabled in the CC policy. If you have Capture ATP and DPI-SSL enabled on the Firewall as well, it will be inspected there first, but you don't need to rely on it.…
    in Does Capture Client work on remote computers not connected to SonicWall firewall? Comment by BWC October 31
  • @bzperry the SKU you mentioned is for the price band 5 to 24 licenses (which means a minimum order of 5 licenses), you need one license for each Endpoint, the Firewall does not need a license because it does not run CC. —Michael@BWC
    in How do endpoint licenses work? Comment by BWC October 30